Xhorse VVDI Key Tool Max Device with VVDI MINI OBD Tool Supports Bluetooth Connection

Xhorse VVDI Key Tool Max Device with VVDI MINI OBD Tool Supports Bluetooth Connection

Manual for Key Tool Max:V1.0.6
Manual for MINI OBD Tool:V1.0.4

Xhorse VVDI Key Max Features:

1: You can use KEY TOOL MAX to connect the dolphin key cutting to cut the key
2: Supports Generate transponder and remote.etc
3: Enter the car directly using KEY MAX+MINI OBD for matching. The entire process can be seamlessly connected without switching devices.
4. KEY TOOL MAX +MINI OBD TOOL can not only match the chip remote control of imported domestic cars, smart card, but also Toyota H chip will be released first on KEY TOOL MAX.

Xhorse VVDI Key Tool Max Function:

• Generate remote and smart key
• Program and Immo transponder
• Generate speical transponder
• Renew remote
• Recognize and copy access card
• Generate and copy garage remote
• Frequency detection and copy remote
• Connect to Xhorse key cutting machine

Generate transponder,Transponder Clone, Generate Remote,Remote Clone, OBD matching transponder/remote/smart card, Clone IC/ID card.

Xhorse VVDI Mini OBD Tool Function

• Key Programming
• Battery Programming
• Odometer Correction
• Steering Angle Calibration
• Key Code Learning
• EABS Programming
• Remote Manual Programming

OBD2 Diagnostic, Immo Programming, Maintenance Light Reset,Throttlebody Learning, KM Calibration and more functions are under development. 

The port which is used to connect the programmer is reserved. After the expansion, the chip can be written start data, and the operation of the IC reading data is equivalent to the function of the Tango Key Programmer.

Xhorse  KEY TOOL MAX can be connected with Condor Dolphin XP-005 key machine via bluetooth, same as operating screen of Dolphin XP-005.


Xhorse VVDI Key Max Parameter

Battery capacity: 3375mAh
Battery life>6 hours
Standby time>5 days
Recharging current: 1500mAh
Brightness>400nlts
Screen resolution: 1280*720P
Camera resolution: 800W