Note for all users: Latest version is 3.01!
Latest update: VW GOL (Kostal immo box), ME 7. Xx engine ECU's PIN code reading.
Version 3.01, DO NOT work with interfaces sold before 10 June 2006!
All legal users can upgrade their interfaces in the future to work with the latest software version.
Single click access for VDO Seed-Key dashes!
(This means: VW Passat B6, Bora/Jetta, Polo to 2004 year, Golf 4, Sharan to 2003 year, Skoda Octavia/Fabia to 2004 year, some Seat dashes up to 2004 year ect...)
VAG Kombiinstrument / Immo box eeprom programmer...By OBD connector!
Direct USB to OBD Connection! All hardware is inside OBD connector!
Works on any computer that has USB port! No more virtual COM Ports! This is a TRUE USB connection!
Windows Vista & XP compatible software!
Car models covered by VAG TACHO 3.01 software:
��Bosch/Motometer dashes for VW 2001-2003 years V07.04, V07.05, V07.08, V07.13 (with scan for 2'nd pass)
��Audi A4, A6, A8 separate immo box 1994-1999 read PIN code, and read/write eeprom!
��Audi A3, A4, A6, TT, New Beetle Magnetti Marelli M73 (1998-2003 year) read PIN code / change mileage!
��New Beetle Magnetti Marelli M73 (2001 to 2005 year) read PIN code
��Almost all VDO dashes for VW/Seat/Skoda up to year 2004 read/write eeprom!
��Almost all VDO dashes for Audi up to year 2001 read/write eeprom!
��Almost all MotoMeter dashes for VW/Seat up to year 2001 read/write eeprom!
��Automatic functions: Change mileage, Read PIN code!
All this by using car OBD connector! Without disassembly dash or immo box from car!
2. For Opel:
Immo1 & Immo2 supported up to year 2004
Manual for programming new keys.
User can program up to 5 diferent keys to an immobiliser.
How to do this:
Insert new key, and switch ignition ON.
Connect to immobilizer.
Enter correct PIN code.
Press "Prog New Key " Message 'Reading key...' will be displayed on screen.
After successful procedure there will be a message: 'Key programmed!' Wait 10 seconds and turn ignition OFF.
Turn ON ignition with same key, and wait until yellow indicator lamp on car dash stop flashing, and ligth on continiously.
Start the car to test new keyIf the indicator lamp continue flashing, this means that transponder is notcompatible to this car or engine ECU, try to program other transponder from another type. If there are error message when try to program new key,user can read errors to see where is the problem.
* VAG TACHO 3.01 interface
* Software CD